Welcome to the
MIRATECH Solutions Guide

MIRATECH is the expert in providing fully integrated, proven exhaust compliance solutions for anyone using industrial engines in a Power Generation, Gas Compression and Mechanical Drives.

Review
Your Solution
Contact us for
Pricing & Details
continue

Tell us about your needs

Your selction did not return any results.
Please adjust your selection and try again.

Applications

  1. Gas Compression
  2. Power Generation
  3. Rail
  4. NESHAP Regulations
  5. Industrial
  6. Air Compression
  7. Liquids Pumping
  8. Bio-Gas
  9. Greenhouse CO2 Enrichment
  10. Industrial Marine

Engine Type

  1. Bi-Fuel Diesel and Natural Gas
  2. Diesel
  3. Natural Gas Lean Burn
  4. Natural Gas Rich Burn

Noise Control

  1. Yes
  2. No

Engine Size

  1. 20 to 200 hp
  2. 200 to 1350 hp
  3. 1350 to 10,000 hp
  4. 10,000 hp and above

Regulated Pollutants

  1. NOx
  2. NO2
  3. CO
  4. VOC (NMNEHC)
  5. HAP's
  6. Particulate Matter (PM)
RESET
 
continue

Submit your Request for Pricing and Details

Your Solution(s):

Contact Information

Error: Please complete form.


Thank You!
back
submit

Piping

Straight Pipes & Tubes

Corrugated Flex Hose

Single Ply Corrugated 321 Stainless Steel Hose suitable for exhaust applications and pressures. Available in cut-to-suit lengths for customer specific project requirements. Larger sizes available upon request.

Cones & Extensions

45 Degree Mitered & Stacks

90 Degree Elbows

45 Degree Elbows

Flex Assemblies

Flex Connections are designed to isolate engine vibration from the remaining exhaust system but are not designed for pipe growth or connection misalignment. Flex hose sections are manufactured from 321SS while connections are mild steel. MIRATECH offers a wide variety of flex connections including OEM engine specific flange types.

Flex Assemblies w/ 90 Degree Elbow

Flex Connections are designed to isolate engine vibration from the remaining exhaust system but are not designed for pipe growth or connection misalignment. Flex hose sections are manufactured from 321SS while connections are mild steel. MIRATECH offers a wide variety of flex connections including OEM engine specific flange types.

Bellows Expansion Joints

Expansion Joints are intended to reduce stress on exhaust pipe systems due to thermal growth as well as vibration or misalignment. MIRATECH bellows are available as single or dual ply with ANSI pattern or OEM Engine Flanges on each end.

WYE Connector - Cummins

Designed for OEM dual outlet engines, wye connectors are intended to combine dual outlets into a single connection point. Wye connectors reduce vibration and noise transmission to the remainder of the exhaust system. Flex sections are 321 stainless steel while the remainder is carbon steel. Inlet flanges are matched to engine outlet flanges as noted. Outlet flanges are drilled to ANSI 150#. Both inlet and outlet flanges are floating for ease of bolt hole alignment.

WYE Connector - Caterpillar

Designed for OEM dual outlet engines, wye connectors are intended to combine dual outlets into a single connection point. Wye connectors reduce vibration and noise transmission to the remainder of the exhaust system. Flex sections are 321 stainless steel while the remainder is carbon steel. Inlet flanges are matched to engine outlet flanges as noted. Outlet flanges are drilled to ANSI 150#. Both inlet and outlet flanges are floating for ease of bolt hole alignment.

WYE Connector - Detroit Diesel/MTU

Designed for OEM multi outlet engines, wye connectors are intended to combine dual outlets into a single connection point. Wye connectors reduce vibration and noise transmission to the remainder of the exhaust system. Flex sections are 321 stainless steel while the remainder is carbon steel. Inlet flanges are matched to engine outlet flanges as noted. Outlet flanges are drilled to ANSI 150#. Both inlet and outlet flanges are floating for ease of bolt hole alignment.

toll free: 800-640-3141

Request a Quote Today!

  • This field is for validation purposes and should be left unchanged.